カテゴリー: プレスリリース

CVE is excited to announce the appointment of Chris Punshon as the Head of New Energy Applications at our head office in Cambridge.

Chris brings a wealth of experience and knowledge from the energy, power and renewables industries, which will be utilised to build on CVE’s existing zero-carbon project portfolio.

Chris’ career in engineering began in 1983, after graduating from the University of Sheffield with an honours degree in Metallurgy B.Met (hons). He then joined TWI Ltd, one of the foremost independent research and technology organisations where he worked for 38 years, starting as a Project Leader and leaving as Industry Group Manager Power and New Energy.

During his career, he has directed many ground-breaking research and development projects relating to welding and joining, material properties, and other advanced technologies; in collaboration with a wide range of clients and partners throughout key industries such as oil and gas, renewable energy and power generation.

With growing numbers of countries committed to achieving net-zero emissions by 2050, new energy applications have never been more important.

As such, Chris’ role will focus on further commercialisation of Ebflow within applications such as offshore wind, pressure vessels (small- and micro-modular reactors SMR and MMRs), as well as hydrogen encapsulation and transportation.

Ebflow is a local vacuum power beam welding technology that brings all the advantages of electron beam and laser welding (productivity, repeatability, accuracy), to the fabrication of large structures of unlimited size, achieving high joint completion rates. Therefore, Chris Punshon will be at the forefront of developing its adoption within zero-carbon, new energy applications.

Chris is also a Chartered Engineer (CEng), a Professional Member of the Institute of Materials, Minerals and Mining (MIMMM), as well as a Fellow of The Welding Institute (FWeldI) – a testament to his experience, reputation, and contribution to the community of welding, joining, and allied technologies.

CVE would like to take this opportunity to welcome Chris to the organisation as we look forward to continuing CVE’s commitment to engineering and innovation together.

The developers of the world’s largest offshore wind farm will carry out the first large-scale pilot of Ebflow for the welding of monopiles, which will reduce welding times by as much as 80%.

CVE’s Ebflow technology is expected to be used at the Dogger Bank A phase of the wind farm, to fabricate welds on offshore wind foundation monopiles, reducing the time it takes to carry out the task from several hours to a matter of minutes.

It will be the first time that reduced pressure electron beam (RPEB) has been used on a large-scale offshore infrastructure project and will take place under a collaborative project named RapidWeld.

The RapidWeld project aims to create an industry-approved weld process for offshore wind, which is more productive and sustainable than established methods while reducing energy and material costs significantly.

The project team comprises of:

• SSE Renewables, a leading developer, owner, and operator of renewable energy across the UK and Ireland
• Sif, a global leading manufacturer of offshore foundations
• TWI, the UK’s foremost welding research establishment
• Cambridge Vacuum Engineering, the designer and manufacturer of Ebflow

Ebflow is a reduced pressure electron beam (RPEB) technology that uses heat generated by a beam of high energy electrons to make a high strength and durable welded steel join, cleanly and efficiently.

Ebflow uses a local vacuum, allowing the system to be readily transported and operated on-site and applied to structures significantly larger than those that can be accommodated in a vacuum chamber.

Ebflow will streamline the fabrication process for offshore wind farms, further increasing the efficiency of large-scale projects and demonstrating increased cost-effectiveness of renewable energy for consumers.

Ebflow will also reduce the carbon emissions associated with the traditional welding methods by 90%.

The RapidWeld project is expected to develop methods that outstrip existing welding technology and reduce the costs of future offshore wind foundation monopiles by up to 20%.

A joint venture between SSE Renewables, Equinor and Eni, SSE Renewables is leading the construction and delivery of Dogger Bank, while Equinor will operate the wind farm on operation. When complete, Dogger Bank will be the largest offshore wind farm in the world.

Steve Wilson, SSE Renewables Project Director for Dogger Bank Wind Farm said:

“This is a ‘first-in-class’ project, establishing this UK innovation as world-leading technology. With monopile type foundations accounting for over 90% of foundations used in UK projects, Ebflow RPEB could realise significant cost savings on future projects.

“These substantial savings will not only benefit the UK offshore engineering industry but could be passed on to UK energy consumers.

“It’s exciting that Ebflow is being used at Dogger Bank – a project which continues to contribute to the UK economy by creating jobs and supporting to the supply chain. No doubt, other offshore projects across the world could ultimately benefit from what the RapidWeld partnership achieves.”

The project has been made possible with a smart grant of £600k from Innovate UK, which is part of the UK Government-backed Research and Innovation organisation.

Sif will be responsible for the fabrication and supply of 190 monopiles and primary steel for the transition pieces, as well as for the marshalling of all foundation components for the first two phases of Dogger Bank Wind Farm.

Chief Operating Officer for Sif, Frank Kevenaar said:

“We see great potential in the Ebflow RPEB welding process for thick section welding. Reduced distortion and elimination of filler material are, amongst others, great advantages. We are very pleased to have the opportunity to contribute to this innovative project that is joining forces and expertise to create new cost-effective production methods.”

Ebflow can reduce the time needed to weld a monopile by 95%, whilst being 94% more energy efficient, resulting in a 98% overall cost reduction – compared to traditional submerged arc welding (SAW) – based on a typical specification of a 60 metre long, 8 metre diameter monopile, with a wall thickness of 80mm.

View the full datasheet or find out more about Ebflow.

Cambridge Vacuum Engineering (CVE), a specialist in the design and manufacture of electron beam welding (EBW) machines, has built its very first laser welding system. Now installed at an important customer in the automotive sector, the machine relies on a TRUMPF TruDisk 1000, a 1kW solid-state laser with optimised beam quality for welding metals, in this case steel and Inconel.

The origins of CVE can be traced back to the late 1950s when two Cambridge graduates founded the company. Through a process of subsequent breakaway groups and acquisitions, the CVE name emerged in the late 1980s. Despite the change of identity, the focus remained the same: EBW and vacuum furnaces, largely in support of aero-engine manufacture.

“In recent years we’ve been supplying a lot more machines to automotive customers, some of which are beginning to make enquiries about EBW alternatives,” reports Steve Horrex, Sales Director at CVE. “Traditionally, EBW works in a vacuum, which is great from a process quality perspective, but vacuum generation and maintenance is sometimes seen as burdensome. For this reason, laser welding is gaining attention in certain applications as it can operate using nothing more than a shield gas.”

Indeed, the company recently received an enquiry for a fully automated, bespoke laser welding system from an existing automotive customer. It would prove to be CVE’s first laser welding machine, marking the beginning of its association with TRUMPF. The machine is being used by a tier-one automotive supplier to weld small (approximately 50mm long) steel and Inconel parts together in reasonably high volumes.

“In this particular application, the join quality produced by laser welding with a shield gas was perfectly adequate,” explains Mr Horrex. “TRUMPF was chosen for its track record in the automotive sector and its reputation for quality engineering. The customer’s R&D centre also had a TRUMPF system, which definitely helped steer the purchase decision.”

Shield gasses protect the weld area from oxygen and water vapour. In addition, unlike EBW, no X-rays are produced, so the process does not require an expensive vacuum chamber. This fact also means that higher productivity can be achieved.

Says Mr Horrex: “TRUMPF turned out to be a good choice for the laser – we were particularly impressed with the expertise of their engineering team, which made the integration of the TruDisk 1000 with our system very smooth. As we were fairly new to the laser business it was good to find a partner with whom we could build trust. Following the successful installation and commissioning of the laser welding machine, we’re now quoting additional systems for the same customer, as well as machines for other clients. The TRUMPF laser has been a really good stepping stone to a new revenue stream.”

Alongside machine reliability, traceability is vital to CVE’s customer. The laser welding system is required to provide full traceability of all weld parameters and process details. This data is then shared with the end user’s MES (manufacturing execution system). With the TruDisk 1000, the extensive data captured by the laser’s intelligent sensors mean that all important parameters can be monitored reliably, in line with Industry 4.0 practices.

Offering a compact footprint and increased robustness, the latest-generation TruDisk 1000 works economically in all laser states thanks to a new pulse function with greater energy efficiency and intelligent energy management.

“Moving forward, the end user is looking to introduce further new parts to the laser welding machine,” says Mr Horrex. “The tooling, work-holding and automation that we devised facilitates rapid component changeover, thus future-proofing the system.”

There is little doubting the size of challenge that CVE has overcome with its new laser welding machine. Going from a blank canvas to a successfully commissioned system in a matter of months is impressive enough. Throw a pandemic into the mix and the feat is even more monumental.

“CVE customers always get the full package, and this now extends to laser welding machines,” concludes Mr Horrex. “Combine our engineering and machine-building expertise with the brand reputation and quality of the TRUMPF TruDisk laser, and our customers have access to a very powerful combination.”

Read the full article on the TRUMPF website.

The incorporation of Aquasium Technology (Beijing) Co. Ltd is now complete, allowing CVE to meet the demands of continued growth in the region and ensuring our customers continue to receive first class support. CVE China is located in The Exchange Twin Towers, which has a world-class landscape design and high-end IT infrastructure. The details of the new office are:

Aquasium Technology (Beijing) Co. Ltd

Suite 5, East Tower, 10th Floor

Figure 1. The Exchange Twin Towers, Beijing.

With its world-class landscape design and high-end IT infrastructure, this major Beijing landmark is designed to meet, and exceed, the demands of the high-profile businesses inside. Some of China’s largest multinational businesses call this building home, including The Associated Press, Cathay Pacific, Swiss Re Group and Nike Sports. With CEO SUITE comfortably housed on the 10th floor of the East Tower, it’s easy to join the roster of premier businesses.

Highlights include:

• Call centre operator
• Fenshui-designed
• Business lounge
• Interactive screen projector
• High speed internet
• High-resolution printing
• IT infrastructure and support

If you would like to know more about our operations in China, please get in touch!

CVE have partnered with Pennsylvania College of Technology who are poised to be pioneers in education for the electron beam welding process.

Electron beam (EB) welding is used in a wide variety of industries, including aerospace, automotive, energy, nuclear, semiconductor and sensor technology. As of 2013, the American Welding Society estimated there were 3,000 electron beam welders in operation globally.

The process can produce very thin welds that can range from one-thousandth of an inch to 2 inches deep. The resulting bead is so thin, explains Michael R. Allen, instructor of welding and co-head of the department, that it requires a magnifying glass to see the detail. The process also provides efficient energy transfer, which results in low heat output and makes it safe to seal sensitive internal electronics packages into devices.

Students are eager for it to become part of their hands-on education

“The thing that excites me the most about Cambridge Vacuum Engineering’s electron beam welder is that it will raise the bar, academically, for Penn College welding students”, said Nathaniel H. Lyon, a senior pursuing a bachelor’s degree in welding and fabrication engineering technology. “To gain a mastery of any process, it’s important to understand how that process works. Well, with EB welding, there are some exciting physics principles involved that I think will push students outside of their critical-thinking ‘comfort zones’ – and that’s where real learning happens!”

A 60kV welder resides in a dedicated lab within the addition to the Lycoming Engines Metal Trade Centre, which opened to students in the fall and was dedicated in February 2020. The expansion nearly doubled the centre’s instructional space and allowed the college to accept more welding students, eliminating the popular program’s traditional waiting list. Construction of the 35,000-square-foot facility was funded in part by a $2 million grant from the U.S. Department of Commerce.

The new equipment, which includes the electron beam welder, and many other industry-standard technologies, not only expands learning opportunities for students but also benefits companies that had already been scrambling to hire the college’s real-world ready welding graduates.

The electron beam welder was acquired through a partnership with Cambridge Vacuum Engineering of England with sales and service based in Agawam, Massachusetts.

“Industry has been calling us and asking us if our students have any training on this type of equipment,” Allen said, “now we can actually say yes.”

Each year more than 200 Penn College students will gain hands-on experience with the EB welder.

“I have read job postings that asked for experience in electron beam welding,” the soon-to-graduate Lyon said. “That used to be a little intimidating, but it won’t be for long.”

“Giving them (students) the opportunity to have hands-on exposure to this stuff I think is going to bring them to a whole new level, and is going to take us with them,” said Ryan P. Good, assistant professor of welding.

Good, Allen and four other welding faculty members received training on a similar EB welder at CVE Inc. in Massachusetts before the college’s equipment was delivered. After a day and a half of training, Tony Slater, technical sales manager for Cambridge Vacuum Engineering, gave the group a quiz. “They scored higher than I’ve seen anyone do before”, Slater said.

Slater was the driving force within Cambridge Vacuum Engineering for the placement of the welder at Penn College.

“After visiting (Penn College), I realised they are forward thinking, and their attitude toward the students would be a perfect match for us,” Slater said.

The expansion of the Penn College welding lab has also brought the addition of a laser welding cell, a dedicated CNC robotic welding lab, an air pressure-controlled specialised welding room, additional capabilities and space for non-destructive testing, rigging and crane operations for work with larger parts, expanded space for pipe welding, and space for hands—on training in Occupational Safety and Health Administration standards.

Pennsylvania College of Technology currently offer the following courses:

• Bachelor’s Degree
• Welding and fabrication
• Engineering technology
• Associate Degree
• Metal fabrication technology
• Welding technology
• Certificate
• Welding

A new technology could improve the efficiency of large-scale manufacturing projects by enabling firms to perform electron beam welding without a vacuum chamber.

Ebflow, which features a local coarse vacuum that can be transported to and operated on site, has been developed by Cambridge Vacuum Engineering and was launched on 1^st January 2018.

The technology is designed to simplify the process of thick section welding in the manufacture of a wide range of large structures including ships, pressure vessels, wind farms and towers, nuclear plants, and many of the structures involved in oil and gas exploration and civil engineering projects.

To date it’s only been possible to perform electron beam welding – a key technology in the fabrication of large, heavy wall structures – at sites equipped with a vacuum chamber large enough to house the structures under manufacture.

But Ebflow’s coarse vacuum can be mounted on tracks and operated locally. The technology can be used in any plant where large components are welded. In tests, Ebflow has been shown to be 20 to 30 times faster than conventional arc welding, offering transformational gains in productivity. At the same time, it uses less power than conventional arc processes, lowering a plant’s carbon footprint.

Among the myriad of other benefits are the ability to perform low-heat input welds that result in reduced distortion – ensuring quality – and the option to perform NDT testing immediately after welding, fast-tracking the manufacturing process and driving down costs.

Speaking ahead of the launch Bob Nicolson, Managing Director at Cambridge Vacuum Engineering, said: “This technology will transform the productivity of fabrication processes throughout the world of heavy engineering. In many cases the speed of welding can be 30 times faster than current methods. The technology has been fully developed and pioneered in Britain and we are now ready to introduce it to the world.”

Figure 1. Operation of an Ebflow system.